AIS328DQTR manufactured by STMicroelectronics, is an ultra-low power high-performance 3-axis linear accelerometer with an I²C interface.
AIS328DQTR has dynamic user selectable full scales of ±2g/±4g/±8g and is capable of measuring accelerations with output data rates from 0.5 Hz to 1 kHz.
AIS328DQTR device may be configured to generate an interrupt signal through inertial wakeup events.
All I²C Mini Modules are designed to operate at 5VDC. This Mini Module includes onboard power regulation and PCA9306 I²C level shifting circuitry to adapt to our 5V I²C standard. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I²C Bus, eliminating the need for soldering. Plug together all the pieces you need for your next automation application. Pull-up resistors are included with all dcubestore.com master devices. If you are wiring in your own I²C port, onboard 4.7K jumper-selectable pull-up resistors are available for convenience purposes.
All I²C Mini Modules include a FREE I2C cable.
This is a general purpose I²C device compatible with all computing platforms, including Raspberry Pi, Beaglbone, Arduino, Particle, BridgeX5, and much more. All dcubestore.com devices support a strict +5V I²C Bus standard.
Arduino Nano and Micro Users :
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano-Master Device
Plug this Device into any Arduino Micro Master Device
Arduino Uno Interface:
Plug this Device into the Arduino Uno Interface Adapter
Raspberry Pi Interface:
Use the Raspberry Pi 2/3 I²C Interface Adapter
Plug this Device into the Particle Photon I²C Shield