DLCT03C20 Monitor current in the most remote locations and keep track of your power consumption from a smartphone or web browser.
This controller has one 10-Amp current monitoring channel, precision tuned to monitor the current flow through the on-board current sensor with a 5% maximum error rate.
To use this DLCT03C20 device, simply run an AC power wire, up to 10 AWG in size, through the center of the sensor. The on-board custom designed CPU will do the rest using I²C communications to the Particle Photon.
This controller includes an I²C expansion port, allowing expansion for more current monitoring inputs or other types of I²C sensors and devices. Four on-board address jumpers allow expansion of up to 16 current monitoring devices through the I²C expansion port.
Mix and match current monitoring controllers of any size to meet your specific application requirements.
This device only requires a 12VDC power supply for operation, which may be plugged into the controller using a 2.1mm center positive barrel connector or on-board terminal block for direct wired power supplies. Particle Photon not included.
This device is tuned for reading current in the 0 to 10-Amp range. Exceeding 10 Amps through the core sensor may damage the on-board CPU. For best accuracy, we highly recommend choosing a controller with the lowest possible amperage rating required for your application. This device is designed for AC current measurement only and cannot be used to monitor DC loads. This device is typically more accurate than commercially available clamp meters and nearly as accurate as most direct wired meters. This device will arrive pre-set to a calibration value that was known to work well in our master designs. For higher accuracy, users may adjust our recommended calibration settings. All current monitoring controllers require half of a second to analyze and compute a current monitoring result for all channels. For best performance, we suggest communications with this device no more than once per second.
*Particle Photon not included.