» » » » DLCT03C20 Current Monitoring Controller 1-Channel 15-Amp 95% Accuracy with WiFi Connectivity using Particle Photon
DLCT03C20 using Particle Photon
DLCT03C20 using Particle Photon
DLCT03C20 using Particle Photon
DLCT03C20 using Particle Photon

DLCT03C20 Current Monitoring Controller 1-Channel 15-Amp 95% Accuracy with WiFi Connectivity using Particle Photon

$45.02

  • Current Monitoring for Particle Photon WiFi Cloud
  • 1-Channel Input with 0 to 15 Amp Input Range
  • Solid Core Current Sensor with 5% Max Error Rate
  • I2C Communications to Particle Photon
  • On-Board I²C Expansion Port
  • No Need of soldering. Plug and Play Device
  • Quick and Easy Daisy-chained Device
  • Expandable to 16 Devices per I²C Port
  • FREE Cross-Platform
  • 0x2A I²C Start Address

10 in stock

Product Description

DLCT03C20 Current monitoring of your AC power load is now possible from anywhere in the world using the Particle Photon* WiFi cloud communications module.

Monitor current in the most remote locations and keep track of your power consumption from a smartphone or web browser using our FREE Mobicle application.

This DLCT03C20 controller has one 15-Amp current monitoring channel, precision tuned to monitor the current flow through the on-board current sensor with a 5% maximum error rate.

To use this device, simply run an AC power wire, up to 10 AWG in size, through the center of the sensor. The on-board custom designed CPU will do the rest using I²C communications to the Particle Photon.

This controller includes an I²C expansion port, allowing expansion for more current monitoring inputs or other types of I²C sensors and devices. Four on-board address jumpers allow expansion of up to 16 current monitoring devices through the I²C expansion port. Mix and match current monitoring controllers of any size to meet your specific application requirements.

 

Technobabble

This device is tuned for reading current in the 0 to 15-Amp range. Exceeding 15 Amps through the core sensor may damage the on-board CPU. For best accuracy, we highly recommend choosing a controller with the lowest possible amperage rating required for your application. This device is designed for AC current measurement only and cannot be used to monitor DC loads. This device is typically more accurate than commercially available clamp meters and nearly as accurate as most direct wired meters. This device will arrive pre-set to a calibration value that was known to work well in our master designs. For higher accuracy, users may adjust our recommended calibration settings. All current monitoring controllers require half of a second to analyze and compute a current monitoring result for all channels. For best performance, we suggest communications with this device no more than once per second.

 

*Particle Photon not included.

Reviews

There are no reviews yet.

Be the first to review “DLCT03C20 Current Monitoring Controller 1-Channel 15-Amp 95% Accuracy with WiFi Connectivity using Particle Photon”

Your email address will not be published. Required fields are marked *