» » » » » MAG3110 3-Axis Digital Magnetometer Electronic Compass I²C Mini Module

MAG3110 3-Axis Digital Magnetometer Electronic Compass I²C Mini Module

$28.51

  • 3-Axis Digital Magnetometer Electronic Compass
  • 400 kHz Fast Mode Compatible I²C Interface
  • Output Data Rates (ODR) up to 80 Hz
  • Sensor, Level Shifter and Voltage Regulator all embedded on the module
  • No Need of soldering. Plug and Play Device
  • Quick and Easy Daisy-chained Device
  • Low-power, Single-Shot Measurement Mode
  • Full-scale Range ±1000 T
  • 0x0E I²C Start Address
  • Modular MAG3110 Breakout Board

10 in stock

Description

The MAG3110 is a small, low-power, digital 3-axis magnetometer.

This device can be used in conjunction with a 3-axis accelerometer to realize an orientation independent electronic compass that can provide accurate heading information.

The MAG3110 is guaranteed to operate over the extended temperature range of -40°C to +85°C.

The MAG3110 is capable of measuring magnetic fields with an output data rate (ODR) up to 80 Hz; these output data rates correspond to sample intervals from 12.5 MS to several seconds.

All I²C Mini Modules are designed to operate at 5VDC. This Mini Module includes on-board power regulation and PCA9306 I²C level shifting circuitry to adapt to our 5V I²C standard. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I²C Bus, eliminating the need for soldering. Plug together all the pieces you need for your next automation application.

Pull-up resistors are included with all dcubestore.com master devices. If you are wiring in your own I²C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

All I²C Mini Modules include a I²C Cable.

Additional information

Dimensions 5.08 x 3.175 x 1.212 cm

Reviews

There are no reviews yet.

Be the first to review “MAG3110 3-Axis Digital Magnetometer Electronic Compass I²C Mini Module”

Your email address will not be published. Required fields are marked *

Product Video

Particle Photon Compass Relay using MAG3110 sensor and MCP23008 relay controller



In this article we will setup a Particle Photon module to monitor compass baring through the MAG3110 Three-Axis Digital Magnetometer Electronic Compass I²C Mini Module. Based on readings from this sensor we will turn relays on and off using the Relay Shield for Particle Photon I²C 8-Channel SPDT 10-Amp.


Raspberry Pi MAG3110 Magnetometer Electronic Compass Sensor Java Tutorial



Java Tutorial MAG3110 3-Axis Digital Magnetometer Electronic Compass I²C Mini Module. The MAG3110 is capable of measuring magnetic fields with an output data rate (ODR) up to 80 Hz; these output data rates correspond to sample intervals from 12.5 ms to several seconds.


Raspberry Pi MAG3110 Magnetometer Electronic Compass Sensor Python Tutorial



Python Tutorial MAG3110 3-Axis Digital Magnetometer Electronic Compass I²C Mini Module. The MAG3110 is capable of measuring magnetic fields with an output data rate (ODR) up to 80 Hz; these output data rates correspond to sample intervals from 12.5 ms to several seconds.


Arduino Nano MAG3110 Magnetometer Electronic Compass Sensor Tutorial



Arduino Nano MAG3110 3-Axis Digital Magnetometer Electronic Compass I²C Mini Module. The MAG3110 is capable of measuring magnetic fields with an output data rate (ODR) up to 80 Hz; these output data rates correspond to sample intervals from 12.5 ms to several seconds.