Login

Register

Login

Register

Acceleration Measurement Using BMA250 and Raspberry Pi

BMA250 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as a 16-bit two’s complement and is accessible through the I2C digital interface. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°.

In this tutorial, we are going to measure the acceleration in all three perpendicular axis using BMA250 and Raspberry Pi. The sensor has been programmed in python language.

Step 1: Hardware Required:

The materials that we need for accomplishing our goal includes the following hardware components:

1. BMA250

2. Raspberry Pi

3. I2C Cable

4. I2C Shield for Raspberry Pi

5. Ethernet Cable

Step 2: Hardware Hookup:

The hardware hookup section basically explains the wiring connections required between the sensor and the raspberry pi. Ensuring correct connections is the basic necessity while working on any system for the desired output. So, the requisite connections are as follows:

The BMA250 will work over I2C. Here is the example wiring diagram, demonstrating how to wire up each interface of the sensor.

Out-of-the-box, the board is configured for an I2C interface, as such, we recommend using this hookup if you’re otherwise agnostic. All you need is four wires!

Only four connections are required Vcc, Gnd, SCL and SDA pins and these are connected with the help of I2C cable.

These connections are demonstrated in the pictures above.

Step 3: Python Code for Acceleration Measurement:

The advantage of using raspberry pi is, that it provides you the flexibility of the programming language in which you want to program the board in order to interface the sensor with it. Harnessing this advantage of this board, we are demonstrating here it’s programming in the python. Python is one of the easiest programming languages with easiest syntax. The python code for BMA250 can be downloaded from our GitHub community that is Dcube Store

As well as for the ease of the users, we are explaining the code here also:

As the first step of coding, you need to download the SMBus library in case of python because this library supports the functions used in the code. So, to download the library you can visit the following link:

https://pypi.python.org/pypi/smbus-cffi/0.5.1

You can copy the working code from here also:

# Distributed with a free-will license.
# Use it any way you want, profit or free, provided it fits in the licenses of its associated works.
# BMA250
# This code is designed to work with the BMA250_I2CS I2C Mini Module available from ControlEverything.com.
# https://www.controleverything.com/content/Accelorometer?sku=BMA250_I2CS#tabs-0-product_tabset-2

import smbus
import time

# Get I2C bus
bus = smbus.SMBus(1)

# BMA250 address, 0x18(24)
# Select range selection register, 0x0F(15)
#		0x03(03)	Set range = +/-2g
bus.write_byte_data(0x18, 0x0F, 0x03)
# BMA250 address, 0x18(24)
# Select bandwidth register, 0x10(16)
#		0x08(08)	Bandwidth = 7.81 Hz
bus.write_byte_data(0x18, 0x10, 0x08)

time.sleep(0.5)

# BMA250 address, 0x18(24)
# Read data back from 0x02(02), 6 bytes
# X-Axis LSB, X-Axis MSB, Y-Axis LSB, Y-Axis MSB, Z-Axis LSB, Z-Axis MSB
data = bus.read_i2c_block_data(0x18, 0x02, 6)

# Convert the data to 10 bits
xAccl = (data[1] * 256 + (data[0] & 0xC0)) / 64
if xAccl > 511 :
	xAccl -= 1024

yAccl = (data[3] * 256 + (data[2] & 0xC0)) / 64
if yAccl > 511 :
	yAccl -= 1024

zAccl = (data[5] * 256 + (data[4] & 0xC0)) / 64
if zAccl > 511 :
	zAccl -= 1024

# Output data to screen
print "Acceleration in X-Axis : %d" % xAccl
print "Acceleration in Y-Axis : %d" % yAccl
print "Acceleration in Z-Axis : %d" % zAccl

The code is executed using the following command:

$> python BMA250.py

gt; python BMA250.py

The output of the sensor is shown in the picture above for the reference of the user.

Step 4: Applications:

Accelerometers like BMA250 mostly find their application in the games and display profile switching. This sensor module is also employed in the advanced power management system for mobile applications. BMA250 is a triaxial digital acceleration sensor which is incorporated with an intelligent on-chip motion-triggered interrupt controller.

 


Be the first to comment “Acceleration Measurement Using BMA250 and Raspberry Pi”

Select your currency
Our Shipping Partners