This I2C 1-Channel 4-20mA current loop receiver is an ideal companion for monitoring industrial sensors over long distances. This I2C Mini Module converts a 4-20 mA current loop to a 16-Bit value using the ADS1115 Analog to Digital Converter. This design includes the INA196 current shunt monitoring chip from Texas Instruments. This I2C Mini Module operates from 5V, like all Mini Modules. This device include a voltage boost circuit to raise the 5V input to 16V for powering the INA196 current shunt monitoring chip.
This 1 channel 4-20mA current loop receiver comes with on board power boost circuit and this 16V power supply can be used to power up the sensor. This 4-20mA current loop receiver board has a 2 pin connector which makes sensor connection real easy. This 4-20mA current loop receiver can be used with arduino, raspberry pi, particle photon, electron, usb, RS485, RS232 and any micro controller which has a i2c port. Readings data from this 4-20mA current loop receiver is simple, it communicates with the master controller over i2c and to read the 4-20mA output all you will need to do is send i2c commands and read the sensor values. This board has ADS1115.
What is the NCD I2C Interface?
NCD is the creator of plug and play modular hardware using the NCD I2C Interface connector standard. NCD I2C devices allow you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C). The NCD I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector. NCD I2C devices communicate 5V I2C data and provides 5V DC power through this connector. NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today. The NCD I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables. NCD I2C devices always include a 6″ (152mm) 4-conductor I2C cable. NCD I2C Mini Modules always include a 3″ (76mm) 4-conductor I2C cable. Cables and connectors are available separately for designers who would like to include their own NCD I2C Interface into their designs.
Plug and Play Connectivity
NCD I2C devices will plug in to any available NCD I2C Output. This includes just about everything we make in the NCD IoT Category, including all NCD IoT devices. We also manufacture a wide range of I2C adapters that make it easy to plug NCD I2C Devices directly into most computing platforms. The NCD I2C Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows. We are always working to add new platform support for NCD I2C devices. NCD I2C Interface devices are compatible with just about everything in the microcontroller industry.
Unlimited I2C Expansion
Based on our plug-and-play I2C interface standard, all NCD I2C devices are equipped with a I2C output port, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more! We are always designing new expansions for our modular plug-and-play I2C framework. We are dedicated to building a product line of interconnected devices to simplify all forms of automation. Re-use or upgrade your hardware in seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!
Powering NCD I2C Interface Devices
Some NCD I2C devices require a external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power. All I2C mini modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.