MQTT Gateway – WiFi Micro Gateway for MQTT — MQTT Gateway – WiFi Micro Gateway for MQTT IoT Long Range Wireless Precision Pressure Sensor Bidirectional Differential IoT Long Range Wireless Precision Pressure Sensor Bidirectional Differential —

2 Channel Industrial IoT Wireless AC Current Monitor Sensor

$ 218.95


  • Industrial Grade Wireless 2-Channel Current Monitor
  • AC Current Range 0-100A RMS Measurement
  • Auto Time Delay Based Data Sample Transmission
  • Current Change Detection and Transmission
  • Configurable Current Change Detection Limits
  • Configurable Current Sensor Calibration Over Wireless
  • Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
  • 2 Mile Line-of-Sight Range with On-Board Antenna
  • Superior LOS Range of up to 28 Miles with High-Gain Antennas
  • Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
  • Example Software for Visual Studio and LabVIEW®
  • Wireless Mesh Networking using DigiMesh®
  • Open Communication Protocol for Easy Software Integration
  • Small 3″ x 3″ Form Factor Wireless IoT Current Sensor
  • Power-Efficient Sleep Mode, Up to 10 Year Battery Life
    • User Configurable Sleep Duration
    • Up to 500,000 Transmissions from 4 AA Batteries
  • Includes Battery Level with Every Transmission
  • Validates and Retries Lost Communication Packets

2 Channel Industrial IoT Wireless AC Current Monitor Sensor

Introducing Dcube’s Long Range Industrial IoT Wireless 2-Channel AC Current Monitor Sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture.  This 2 Channel Industrial IoT Wireless AC Current Monitor Sensor transmitter works together with two split-core current sensors (included). It samples current at a high data rate and calculates the RMS Current value and sends a wireless transmission. This process is repeated at user-defined timing intervals while sleeping in between to minimize power consumption. The sensor comes with two 1.25 meter long split-core current sensors which makes installation easy.

This 2 Channel Industrial IoT Wireless AC Current Monitor Sensor is capable of detecting the change in current at user-defined detection time intervals and sending out data if the current change is greater than user-defined detection change percentage. This change detection feature can be enabled or disabled as needed. To minimize power consumption, the current sensor sleeps to preserve battery life. Both of these features work together to support multiple application areas in one package.

Powered by just 4 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.

IoT Security

We take IoT security very seriously, which is why we encrypt every IoT sensor, gateway, modem, and device in the Dcube Store Enterprise product line.  Encryption is much easier to manage than you might expect, as the encryption does not get in the way of using the device.  We include a standard 128-Bit AES Encryption key with every device or we can help you integrate a new encryption key into all of your devices.  All hardware devices must use the same encryption key.  Once the keys are set, the hardware manages the rest for you, 100% in the background.

Wireless Range and Protocol

Dcube Store long-range wireless IoT sensors use the DigiMesh® protocol from Digi.com.  DigiMesh® was designed by THE industrial leader in secure wireless communications for industrial applications.  DigiMesh® automatically hops data from gateway to gateway until it arrives at the desired destination.  Dcube Store IoT sensors are capable of a 2-Mile line-of-site communication distance with the included antennas and up to 28-mile range when using high-gain antennas.

Your IoT Sensor Data Belongs to You!

Your data belongs to YOU and it’s up to you to decide where you want your IoT sensor data to arrive.  Don’t be bogged down by the limitations of proprietary cloud solutions, post the data where you need it most.  We offer an open communications protocol so you can integrate Dcube Store wireless transmitters into your own software.  This allows integration of Dcube Store IoT sensors into any control system or gateway you could ever imagine.  Send data to a PC, Mac, or Linux computer, or a Raspberry Pi using Dcube Store modems.  Send data to popular cloud platforms such as Microsoft® Azure® IoT, Losant, and MQTT using Dcube Store Micro Gateways.  We can also help get data from Dcube Store wireless IoT sensors to embedded platforms such as Arduino.  We also offer sample code for Microsoft® Visual Studio, Node-RED, LabVIEW®, and Python.  Our documentation fully breaks down the packet structure, so integration into other languages is possible.  We may even be able to help, so please feel free to contact us if you are working with a platform not mentioned here.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You May Also Like…

Related Products

Select your currency
USD United States (US) dollar
Our Shipping Partners