Login

Register

Login

Register

Water Level Sensor with Analog to Digital Converter ADC121C021 — Water Level Sensor with Analog to Digital Converter ADC121C021 VCNL4010 Proximity and Ambient Light Sensor with Infrared Emitter 0.25 lux to 16K lux I2C Mini Module VCNL4010 Proximity and Ambient Light Sensor with Infrared Emitter 0.25 lux to 16K lux I2C Mini Module —

Water Detection Sensor with Buzzer

$ 25.95

Features

  • I2C Water Detection Sensor
  • .75 Square Inch Detection Area
  • On Board Buzzer for Alarm Applications
  • 2 Extra GPIO Pads for External Use
  • One Device Per I2C Port
  • I2C Mini Module Footprint
  • Includes 3″ I2C Cable
  • Cross-Platform Compatible

This Water Sensor is designed to detect water or liquid leakage.  The convenient I2C interface makes it easy to add water leakage detection to any IoT application in seconds.  Integrated on-board Buzzer can be used for alarm notification applications. This Water detects Sensor uses a PCA9536 digital IO to detect the water and to control the buzzer.

The water detects lines are connected to the GPIO0, which connects to ground when water is detected (Low: Water Detected, High: No Water Present).  The onboard buzzer is activated when IO3 is set high.

PCA9536 has two unused IO pins connected to solder pads, which can be used as general-purpose digital IO applications.

This sensor has .75″ square inch of the detection area.

All I2C Mini Modules are designed to operate at 5VDC. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I2C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application. Pull-up resistors are included with all Dcube Store master devices. If you are wiring in your own I2C port, onboard 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

What is the I2C Interface?

The supplier of plug and play modular hardware using the I2C Interface connector standard.  It allows you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  These devices communicate on the power of 5V I2C data and provide 5V DC power through this connector.  The advanced embedded devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  The device Package always includes a 6″ (152mm) 4-conductor I2C cable.  The I2C based Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own I2C Interface into their designs.

Plug and Play Connectivity

The advanced Embedded devices will plug into any available I2C Output.  This includes just about everything we make in the DCube Store IoT Category, including all the other IoT devices.  We also supply a wide range of I2C adapters that make it easy to plug I2C Devices directly into most computing platforms.  The advanced Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for I2C devices.  These Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all the I2C devices which are equipped with the above protocol output ports, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware within seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering I2C Interface Devices

Some I2C devices require an external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini-modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


Related Products

Select your currency
Our Shipping Partners