Login

Register

Login

Register

CPS120 Digital Barometer Altimeter I2C Mini Module — CPS120 Digital Barometer Altimeter I2C Mini Module BH1745NUC Digital Ambient Light and Color Sensor I2C Mini Module BH1745NUC Digital Ambient Light and Color Sensor I2C Mini Module —

BME280 Digital Humidity ±3%RH Pressure and Temperature Sensor I2C Mini Module

$ 23.95

Features

  • ±3% Relative Humidity Sensor
  • Pressure Sensing 300 to 1100 hPa
  • -40…+85 °C Temperature Sensor
  • Up to 3.4 MHz Communication Speed
  • 2 Devices per I2C Port
  • 0x76 I2C Start Address
  • Modular BME280 Breakout Board

The BME280 is a combined humidity, pressure and temperature sensor that allows for two devices per I2C port.

The humidity sensor in the BME280 provides an extremely fast response time and high overall accuracy with ±3%RH. The pressure sensor in this device is an absolute barometric pressure sensor with extremely high accuracy and resolution and low noise output. The temperature sensor has been optimized for the lowest noise and highest resolution and is used for temperature compensation of the pressure sensor and can also be used for estimation of ambient temperature. Measurements with the BME280 can be performed by the user or performed at regular intervals.

All I2C Mini Modules are designed to operate at 5VDC. This Mini Module includes on-board power regulation and PCA9306 I2C level shifting circuitry to adapt to our 5V I2C standard. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I2C Bus, eliminating the need for soldering. Plug together all the pieces you need for your next automation application.

Pull-up resistors are included with all DCube master devices. If you are wiring in your own I2C port, onboard 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

All I2C Mini Modules include a I2C Cable.

What is the I2C Interface?

I2C Interface allows you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  These devices communicate on the power of 5V I2C data and provide 5V DC power through this connector.  The advanced embedded devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  The device Package always includes a 6″ (152mm) 4-conductor I2C cable.  The I2C based Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own I2C Interface into their designs.

Plug and Play Connectivity

These advanced Embedded devices will plug into any available I2C Output.  This includes just about everything we make in the DCube Store IoT Category, including all the other IoT devices.  We also supply a wide range of I2C adapters that make it easy to plug I2C Devices directly into most computing platforms.  The advanced Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for I2C devices.  These Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all the I2C devices which are equipped with the above protocol output ports, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware within seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering I2C Interface Devices

Some I2C devices require an external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini-modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


You May Also Like…


Related Products

Select your currency
USD United States (US) dollar
Our Shipping Partners
shipping