IoT Long Range Wireless Temperature Humidity Sensor — IoT Long Range Wireless Temperature Humidity Sensor 900HP-S3B Long Range Wireless Mesh Modem with USB Interface 900HP-S3B Long Range Wireless Mesh Modem with USB Interface —

IoT Long Range Wireless Vibration And Temperature Sensor

$ 178.95


  • Industrial Grade 3-axis Vibration Sensor
  • Samples RMS, MAX and MIN g vibration
  • Vibration Range ±16g and Sample Rate up to 952Hz
  • Noise Removal using Low-Pass Filter
  • Frequency Range (Bandwidth) up to 408Hz
  • 2 Mile Range with On-Board Antenna
  • Superior LOS range of up to 28 miles with High-Gain Antennas
  • Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
  • Example Software for Visual Studio and LabVIEW®
  • Wireless Mesh Networking using DigiMesh®
  • Configuration mode for Sensor and Wireless Settings
  • Up to 500,000 Transmissions from 2 AA Batteries

Introducing Dcube Store’s Industrial IoT Long Range wireless vibration and temperature sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. Incorporating a precision 16-bit vibration and temperature sensor, this device transmits highly accurate vibration and temperature data at user-defined intervals.

During Power-Up, this vibration sensor learns “normal” base-line vibration from the monitored device.  This base-line vibration is subtracted from regular sampled vibration readings to improve relevant vibration data.  Ideally, the monitored device should be off while the sensor is learning.  Once the sensor stabilizes and starts sending data, the device/machinery being monitored can be powered on.  This Industrial IoT wireless vibration sensor samples 3-axis of Vibration data for 100ms and then calculates RMS, Maximum, and Minimum vibration readings. This sensor combines these data with temperature data in a data packet and transmits the result to modems and gateways within the wireless range.  Once the transmission is complete, the vibration sensor goes back to sleep, thus minimizing power consumption.

Powered by just 2 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.  Optionally, this sensor may be externally powered, making it an ideal choice for wireless vibration monitoring system for industrial equipment.  With an open communication protocol, this sensor transmits hardware encrypted data that can be integrated with just about any control system or gateway.  Data can be transmitted to a PC, a Raspberry Pi, to Losant IoT cloud, Microsoft® Azure® IoT, and an embedded system all at the same time. Sensor parameters and wireless transmission settings can be changed using our free LabVIEW® monitoring software on a desktop PC.

The long-range, price, accuracy, battery life and security features of Wireless Vibration Sensor make it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.

Wireless Range and Protocol

Dcube’s long-range wireless IoT sensors use the DigiMesh® protocol from Digi.com. DigiMesh® was designed by THE industrial leader in secure wireless communications for industrial applications. DigiMesh® automatically hops data from gateway to gateway until it arrives at the desired destination. Dcube’s IoT sensors are capable of a 2-Mile line-of-site communication distance with the included antennas and up to 28-mile range when using high-gain antennas.

Your IoT Sensor Data Belongs to You!

Your data belongs to YOU and it’s up to you to decide where you want your IoT sensor data to arrive.  Don’t be bogged down by the limitations of proprietary cloud solutions, post the data where you need it most.  We offer an open communications protocol so you can integrate Dcube wireless transmitters into your own software.  This allows integration of Dcube IoT sensors into any control system or gateway you could ever imagine.  Send data to a PC, Mac, or Linux computer, or a Raspberry Pi using Dcube modems.  Send data to popular cloud platforms such as Microsoft® Azure® IoT, Losant and MQTT using Dcube Micro Gateways.  We can also help get data from Dcube wireless IoT sensors to embedded platforms such as Arduino.  We also offer sample code for Microsoft® Visual Studio, Node-RED, LabVIEW®, and Python.  Our documentation fully breaks down the packet structure, so integration into other languages is possible.  We may even be able to help, so please feel free to contact us if you are working with a platform not mentioned here.

There is no better IoT Long Range Wireless Thermocouple Sensor on the market today.  Nothing compares with the long range, the price, the accuracy, the battery life, or the security features we have to offer.

Transmission Interval

This device sends data periodically, based on user-preset timing intervals.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You May Also Like…

Related Products

Select your currency
USD United States (US) dollar
Our Shipping Partners