Login

Register

Login

Register

LM75BIMM Temperature Sensor ±2°C 9-Bit with 3 Address Lines I2C Mini Module — LM75BIMM Temperature Sensor ±2°C 9-Bit with 3 Address Lines I2C Mini Module ISL29003 Light Sensor with Programmable Gain 0-64,000 lux 16-Bit I2C Mini Module ISL29003 Light Sensor with Programmable Gain 0-64,000 lux 16-Bit I2C Mini Module —

ISL29125 Digital Red Green Blue Color Light Sensor with IR Blocking Filter I2C Mini Module

$ 25.95

Features

  • I2C Digital Output Red, Green, and Blue Color Light Sensor
  • ADC Resolution 16 bits
  • Range 0: 5.7m lux to 375 lux
  • Range 1: 0.152 lux to 10,000 lux
  • Programmable Interrupt Windows
  • 0x44 I2C Start Address
  • Modular ISL29125 Breakout Board

Intersil’s ISL29125 is a low power, high sensitivity digital RGB color light sensor with an I2C interface.

Its state-of-the-art photodiode array provides an accurate RGB spectral response and excellent light source to light source variation (LS2LS).

The ISL29125 digital light sensor is designed to reject IR in light sources allowing the device to operate in sunlight or dark rooms. The integrating ADC rejects 50Hz and 60Hz flicker caused by artificial light sources. A selectable range allows the user to optimize sensitivity suitable for the specific application. In the normal operation mode, the device consumes 56μA, which reduces to 0.5μA in power-down mode. The ISL29125 supports hardware and software user-programmable interrupt thresholds.
The Interrupt persistency feature reduces false trigger notification.

All I2C Mini Modules are designed to operate at 5VDC. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I2C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.

Pull-up resistors are included with all Dcube Store master devices. If you are wiring in your own I2C port, onboard 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

FREE I2C cable included.

What is the I2C Interface?

I2C Interface allows you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  These devices communicate on the power of 5V I2C data and provide 5V DC power through this connector.  The advanced embedded devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  The device Package always includes a 6″ (152mm) 4-conductor I2C cable.  The I2C based Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own I2C Interface into their designs.

Plug and Play Connectivity

These advanced Embedded devices will plug into any available I2C Output.  This includes just about everything we make in the DCube Store IoT Category, including all the other IoT devices.  We also supply a wide range of I2C adapters that make it easy to plug I2C Devices directly into most computing platforms.  The advanced Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for I2C devices.  These Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all the I2C devices which are equipped with the above protocol output ports, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware within seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering I2C Interface Devices

Some I2C devices require an external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini-modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


You May Also Like…


Related Products

Select your currency
USD United States (US) dollar
Our Shipping Partners
shipping